Average Reviews:
(More customer reviews)Was skeptical, as I usually am, but this tool lives up to its name.
Have installed alot of 3/4" 2-1/4" plank oak flooring with it so far, have had 1 misfire. Instructions say to not hit it too hard, but I found that it takes a good solid whack to get it to fire completely. Once you do that, it's a breeze. Always seats where it's supposed to, and fires the nails to the right depth. Too light a whack will not sink the nails.
It's really solidly built and balanced really nicely. One drawback, I wish I could check magazine level without opening it up, but it's not too bad. It makes a hollower sound when you're dry firing.
Click Here to see more reviews about:
Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler GunThe patented design of the Ramsond RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun--without changing magazines. Powered by compressed air, this tool features patented air booster chambers for maximum driving force and speed. It tackles virtually all thickness of hardwood flooring and includes a non-marring base system to protect against damage. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold.
Accepts 15.5- and 16-gauge staples from1" to 2" and "L" cleats from 1-1/2" to 2".Patented Two-in-One Magazine and Driver SystemThis dual-purpose tool has a patented two-in-one magazine and driver system that accommodates both cleats and staples. Designed for 15.5- and 16-gauge staples from 1 to 2 inches, and "L" cleats from 1-1/2 to 2 inches, the magazine has a 100 staple/cleat capacity. Loading the fastener is quick and easy--simply pull the magazine back, drop in the fasteners, and release the drawer--it takes less than 10 seconds.
Precise Air-Powered OperationThe Ramsond RMM4 operates with the power of compressed air (60 - 120 PSI) and is equipped with a standard 1/4-inch NPT air inlet for easy compatibility. To use, simply attach your air compressor's hose to the RMM4's air inlet, then rest the nose of the RMM4 squarely against your work surface to fire.
The direction and angle of the staple/cleat will be automatically aligned for precision driving. And with only a slight strike of the mallet upon the actuator, the RMM4 will shoot a cleat nail or staple through your flooring at the proper angle and depth.
Patented Air-Booster ChambersMost conventional flooring nailers/staplers store compressed air within the body of the tool. Upon mallet strike, the air reserved in the body of the tool is released, driving the blade and shooting the fastener. The RMM4 takes this design one step further. In addition to storing compressed air inside its body, the RMM4 continuously stores compressed air in two patented air acceleration/booster chambers located in the handle.
By storing extra compressed air, these sealed chambers ensure that the fasteners shoot with sufficient force for perfect penetration in the flooring surface. The booster chambers also accommodate quicker retraction of the actuator and blade when compared with conventional units.
Non-Marring Base SystemFeaturing an adjustable non-marring base system, the RMM4 provides protection against scratches and allows you to drive fasteners fast and close to the wall. The base system is equipped with two composite disks in the front, a middle guide, and a rear nylon-derivative plate. The combination of these three mechanisms ensures that the surface of your hardwood flooring is not marred or damaged during installation. It also provides for tool balance and optimal positioning against the work surface for fast, accurate installation.
Works with Most Thicknesses of Hardwood FlooringThe RMM4 series is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates--simply install the appropriate base plate for your application.
Durable and ComfortableWith over 30,000 units sold in North America, the RMM4 is sure to deliver on its promises. Designed for long-term use, the Ramsond RMM4 is an industrial-strength power tool that's comfortable to use. Its body is constructed of a durable, lightweight die-cast alloy, and its driver blade is constructed of heat-treated hardened steel for long-lasting resilience. For user comfort, the RMM4 has a long-reach handle with a padded cushioned grip that offers increased balance and control.
The RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer is manufactured under strict ISO guidelines for quality control and safety, and it is backed by a one-year warranty.
What's in the BoxFlooring Stapler/Cleat Nailer, mallet, goggles, bottle of oil, four Allen wrenches, internal key/wrench, O-ring kit, two nylon composite base plates, and a blow-molded carrying case.
Get 32% OFF
Click here for more information about Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun
